Motorcycles & Cars

Archive for January, 2010

Use And Tune Harley Carburetor For Smooth Ride

Harley the name is not new in the domain of automobile accessories and devices. The carburetor from Harley Davidson is exclusively meant for a smooth ride on your bike. The Harley carburetor has a long life provided you tune it from time to time. You won’t face any kind of hassle in driving your bike if the tuning is done properly.

The process of tuning for better performance

Don’t think you won’t be able to do it and dump your bike in a garage. It is nothing like that. Things are rather simple and you can yourself conduct the process of tuning the Harley carburetor. The tuning becomes important for the maintenance of the carburetor.

Well to begin with remove the Harley carburetor from the main body of the engine. You cannot just open and remove it as if opening your shirt. A particular technique has to be followed. The fuel has to be removed from the carburetor bowl and only then you can clean the thing. The backing plate and the bolts are to be removed in parts and the choke cable has to be also taken off.

The throttle cables are next put down. Therefore one by one the individual parts are disassembled. You need not entirely open the throttle cables. When the carburetor bowl is cleaned with the carburetor cleaner and you set down to reset the arrangement adjust the throttle cables in the right location.

Resetting of the cables and reinstallation of the carburetor

The final round of tuning is the process of reassembling and fixing up the cables along with the clean carburetor bowl. The problem you face while riding a bike in simple terms is the heating up of the engine. And you fail to judge that the problem lies with the carburetor. Most of the times you even decide to change the whole unit of the carburetor.

Such changes are not required in Haley’s carburetor. Simple tuning brings it back to the original performance. While tuning there is a chance of misplacing a cable or it can also be so that you cannot fix the exact cables in the right place. It is always suggested to tag or mark the cables used in a Harley carburetor. This will create no fuss either at the times of removal or at the times of resetting.

The wiring system attached to the cables of the carburetor is to be handled with care. Don’t damage the fine metal wires or else you will have to replace them and get new ones fixed up. After tuning your bike or specifically the Harley carburetor take a short trip and enjoy the difference. You won’t complain any more about the engine.

About the writer:  Gregg Hall is an author living in Navarre Beach Florida. Find more about this as well as motorcycle boots at http://www.westernandworkboots.com

Understanding The Brakes On Your Motorcycle

You know that the first thing that you thought of when you went in to get your bike was how to go faster but what about how you are going to stop? This may not have been on your mind even if it should have been.

Getting your bike to go faster is one thing but when it comes to stopping there is only one thing that you can rely on and that is your brakes. These little motorcycle parts are going to help you to keep from crushing your head and not being able to avoid that brick wall that is in front of you. Where are you going to get them at?

The most common place to get new breaks for your motorcycle is going to be the local motorcycle parts store. This is a great place to go and look for your breaks because they will carry anything that relates to the motorcycle world. You may have seemed the generic ones that they have and will probably go for one of those motorcycle parts when you start looking for them.

These motorcycle parts are also available on the Internet and can be bought online there as well. You just have to do a short search on the Internet and then you will probably bring up a lot of results. Don’t get overwhelmed with this because you will probably only need to look at certain results and then chose the one that will work for you and the motorcycle parts that you are looking for.

Once you have found the motorcycle parts that you need you can get to work putting the breaks on the bike. This may get a little complicated because of the work that goes into getting it just right. You can hire a professional if you are not good at this kind of work. Many people have tried to change the breaks on their bikes and have gotten lost with it. Having a pro do it for you insures that it’s right and that your bike goes and stops on a dime.

When you are looking at what breaks to have on your motorcycle you should not go with the first ones you see but rather the motorcycle parts that will work well with the bike that you have and need the breaks on. You can get the right motorcycle parts for your needs if you take the time to look at all your options.

About the writer:  Victor Epand is an expert consultant about motorcycle gear used motorcycle parts and used car parts. When shopping for motorcycle gear or used parts we recommend only the best stores for motorcycle brakes used motorcycle brakes and used car parts.

Understanding How To Buy A Motorbike

If you are considering buying a motorbike then there is a lot to consider before you decide to choose one. For a start you first have to set a budget to ensure that you do not become too attached to a motorbike that you cannot afford. Many people are just used to buying cars so they have no experience in what it takes to buy a motorbike how that does that not mean they should be put off buying one; in fact almost the exact opposite!

Buying a bike involves firstly developing a short list of what you are considering. If you have already decided on a specific make and model then you are half way there however other people have a different approach. Some will decide that they just want a bike and are not too sure about make model or even engine size. Other people have a different approach where they are already sure about what kind of model they want. Everyone is different however if you are not too sure you should make a shortlist.

If you are not sure about whether you want a new or used bike then here is what you need to know. Firstly if you are buying a used bike then it will certainly be cheaper than a new bike however there are a few negative points to consider. For a start it can be a lot more complicated and also hard to work out if you are getting a good deal or not. Many people are worried about how the transaction might go considering that they are not dealing with a business; instead you are usually dealing with an indvidual. Despite this this is not always the case. You can always go to a broker or a used motorbike dealer however they will usually markup the price a lot more than an individual selling a bike. It is up to you to consider whether or not it is worth it.

You will also have to set a budget in order to buy a motorbike. Yes like anything a motorcycle requires a budget to be set which you can then go onto review. After you have set a budget you can then go onto look at options and automatically right off options that are not what you are looking for.

If you are wanting to buy a motorbike then you will need to consider how you are going to be storing your bike. Yes folks you should be thinking about this before you actually buy the bike. If you are not able to store your bike then why would you buy one the now? Many people buy bikes and then have to worry about things. If you do not have a garage then one thing that you could consider doing is asking your neighbour if it is ok to keep your bike there you could also offer them money to ensure that your proposal is not interpretted as being too rude!

About the writer:  Motorcycle Reviewer is a website about motorcycles and motorbikes